Dimensioni e tolleranze EN 10253-4 (DIN 2617)

Ø DN Ø D
15 21,3

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):25 (17.5) +/-4

20 26,9

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):25 +/-4

25 33,7

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):38 (25) +/-4

32 42,4

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):38 +/-4

40 48,3

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):38 +/-4

50 60,3

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):38 +/-4

65 76,1

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):38 +/-4

80 88,9

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%, max +/- 0,5 mm
DIN 2617 | *:+/- 0,4 mm

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):51 +/-4

100 114,3

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,5 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):64 +/-4

125 139,7

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,5 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):76 +/-7

150 168,3

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,5 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):89 +/-7

200 219,1

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):102 +/-7

250 273,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):127 +/-7

300 323,9

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):152 +/-7

350 355,6

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):165 +/-7

400 406,4

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):178 +/-7

450 457,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):203 +/-7

500 508,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):229 +/-7

600 610,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):-12,5% /+15%

Altezza
K (h):267 +/-7

700 711,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):T<=10mm: -0,35mm /+15%T>10mm:-0,5mm /+15%

Altezza
K (h):267 290 (a) +/-7 (+/-10)

800 813,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):T<=10mm: -0,35mm /+15%T>10mm:-0,5mm /+15%

Altezza
K (h):267 330 (b) +/-10

900 914,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):T<=10mm: -0,35mm /+15%T>10mm:-0,5mm /+15%

Altezza
K (h):267 370 (c) +/-10

1000 1016,0

D_INT
Ø interno:D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2617:+/-1%
DIN 2617 | *:+/- 0,6 %

Tolleranza sullo spessore
T (s1):T<=10mm: -0,35mm /+15%T>10mm:-0,5mm /+15%

Altezza
K (h):305 420 (d) +/-10

Se non diversamente indicato, le misure sono in mm.
Le dimensioni tra parentesi si riferiscono solo alla DIN 2617.

Diametri:
Le tolleranze sul diametro esterno devono essere misurate alle estremità.
* Opzioni che devono essere specificate nell’ordine.

Ovalizzazione:
L’ovalizzazione (0) è calcolata in percentuale, con la seguente equazione:
0 = (Dmax-Dmin)/Dx100, dove:
Dmax = max. diametro esterno D, misurato nello stesso piano, in mm;
Dmin = min. diametro esterno D, misurato nello stesso piano, in mm;
D = diametro esterno specificato, in mm.
Per raccordi di diametro esterno D ≤ 406,4 mm, l’ovalizzazione è inclusa nei limiti del diametro
Per raccordi di diametro esterno D> 406,4 mm e con D / T <= 100, l’ovalizzazione non deve superare il 2%.
Per i raccordi con un rapporto D / T > 100, i valori di ovalizzazione devono essere concordati al momento della richiesta e dell’ordine.
Per la DIN 2617 vedi la nota a pag. 60 (DIN 2609).

(a) DIN 2617, per spessori > 25 mm
(b) DIN 2617, per spessori > 17,5 mm
(c) DIN 2617, per spessori > 10 mm
(d) DIN 2617, per spessori > 14,2 mm

Su richiesta possiamo produrre fondelli in accordo alla DIN 28013.


Sfoglia Catalogo