Dimensioni e tolleranze EN 10253-4 (DIN 2616)

Ø DN x DN1	Ø D x D1
20 x 15	26,9 x 21,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:38 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
25 x 20	33,7 x 26,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:51 (50) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
25 x 15	33,7 x 21,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:51 (50) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 25	42,4 x 33,7
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:51 (50) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 20	42,4 x 26,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:51 (50) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 15	42,4 x 21,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:51 (50) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 32	48,3 x 42,4
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:64 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 25	48,3 x 33,7
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:64 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 20	48,3 x 26,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:64 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 40	60,3 x 48,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:76 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 32	60,3 x 42,4
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:76 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 25	60,3 x 33,7
Ø interno D – 2 x w.t. Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:76 +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 50	76,1 x 60,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:89 (90) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 40	76,1 x 48,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:89 (90) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 32	76,1 x 42,4
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:89 (90) +/-2 (+/-2,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 65	88,9 x 76,1
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:89 (90) +/-2 (+/-3) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 50	88,9 x 60,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:89 (90) +/-2 (+/-3) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 40	88,9 x 48,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1%, max +/- 0,5 mm DIN 2616 \| :+/- 0,4 mm Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:89 (90) +/-2 (+/-3) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 80	114,3 x 88,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:102 (100) +/-2 (+/-3) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 65	114,3 x 76,1
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:102 (100) +/-2 (+/-3) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 50	114,3 x 60,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:102 (100) +/-2 (+/-3) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
125 x 100	139,7 x 114,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:127 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
125 x 80	139,7 x 88,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:127 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
125 x 65	139,7 x 76,1
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:127 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 125	168,3 x 139,7
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:140 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 100	168,3 x 114,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:140 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 80	168,3 x 88,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,5 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:140 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 150	219,1 x 168,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:152 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 125	219,1 x 139,7
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:152 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 100	219,1 x 114,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:152 +/-2 (+/-3,5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
250 x 200	273 x 219,1
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:178 +/-5 (+/-4) Allineamento X(Q):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater*
250 x 150	273 x 168,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:178 +/-5 (+/-4) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
250 x 125	273 x 139,7
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:178 +/-5 (+/-4) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 250	323,9 x 273
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:203 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 200	323,9 x 219,1
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:203 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 150	323,9 x 168,3
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:203 +/-5 (+/-5) Allineamento X(Q):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater*
350 x 300	355,6 x 323,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:330 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
350 x 250	355,6 x 273
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:330 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
350 x 200	355,6 x 219,1
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:330 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 350	406,4 x 355,6
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:356 (355) +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 300	406,4 x 323,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:356 (355) +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 250	406,4 x 273
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:356 (355) +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 400	457 x 406,4
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:381 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 350	457 x 355,6
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:381 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 300	457 x 323,9
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:381 +/-5 (+/-5) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 400	508 x 457
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:508 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 400	508 x 406,4
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:508 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 350	508 x 355,6
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:508 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 500	610 x 508
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:508 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 450	610 x 457
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:508 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 400	610 x 406,4
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:-12,5% / +15% Lunghezza L:508 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
700 x 600	711 x 610
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
700 x 500	711 x 508
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
700 x 450	711 x 457
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-5 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
800 x 700	813 x 711
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
800 x 600	813 x 610
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
800 x 500	813 x 508
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
900 x 800	914 x 813
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
900 x 700	914 x 711
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
900 x 600	914 x 610
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
1000 x 900	1016 x 914
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
1000 x 800	1016 x 813
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):
1000 x 700	1016 x 711
Ø interno D – 2 x w.t. Tolleranza sul Diametro D/DI EN 10253-4 \| D2:+/-1% or 0,5 mm whichever is the greater EN 10253-4 \| D3:+/-0,75% or 0,3 mm whichever is the greater EN 10253-4 \| D4:+/-0,5% or 0,1 mm whichever is the greate DIN 2616:+/-1% DIN 2616 \| :+/- 0,6 % Tolleranza sullo spessore* T:T<=10 mm: -0,35 mm / +15% Lunghezza L:610 +/-10 (+/-6) Allineamento X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Ø interno Tolleranza sul Diametro D/DI EN 10253-4 \| D2: EN 10253-4 \| D3: EN 10253-4 \| D4: DIN 2616: DIN 2616 \| : Tolleranza sullo spessore* T:T>10 mm: -0,5 mm / +15% Lunghezza L: Allineamento X(Q***):

Se non diversamente indicato, le misure sono in mm.
Le dimensioni tra parentesi si riferiscono solo alla DIN 2616.

Diametri:
Le tolleranze sul diametro esterno devono essere misurate alle estremità.
Al fine di garantire il regolare flusso del fluido attraverso il raccordo, il diametro interno, in qualsiasi sezione, deve essere almeno l’80% del diametro interno alle estremità.
* Opzioni che devono essere specificate nell’ordine.

Ovalizzazione:
L’ovalizzazione (0) è calcolata in percentuale, con la seguente equazione:
0 = (Dmax-Dmin)/Dx100, dove:
Dmax = max. diametro esterno D, misurato nello stesso piano, in mm;
Dmin = min. diametro esterno D, misurato nello stesso piano, in mm;
D = diametro esterno specificato, in mm.
Per raccordi di diametro esterno D ≤ 406,4 mm, l’ovalizzazione è inclusa nei limiti del diametro.
Per raccordi di diametro esterno D> 406,4 mm e con D / T <= 100, l’ovalizzazione non deve superare il 2%.
Per i raccordi con un rapporto D / T > 100, i valori di ovalizzazione devono essere concordati al momento della richiesta e dell’ordine.
Per la DIN 2616 vedi la nota a pag. 60 (DIN 2609).

Fuori squadra:
*** DIN 2616, previo accordo può essere ridotta a 0,5% con un massimo di 0,5 mm.

Tubi

Raccordi

Prefabbricazioni

Dimensioni e tolleranze EN 10253-4 (DIN 2616)