logo
IT
IT ENG

Tubi

Raccordi

Prefabbricazioni

Dimensioni e tolleranze EN 10253-4 (DIN 2615)

Ø DN x DN1 Ø D x D1
15 x 15 21,3 x 21,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
25 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
20 x 20 26,9 x 26,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
29 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
20 x 15 26,9 x 21,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
29 +/-2

G(b)
29 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
25 x 25 33,7 x 33,7

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
38 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
25 x 20 33,7 x 26,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
38 +/-2

G(b)
38 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
25 x 15 33,7 x 21,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
38 +/-2

G(b)
38 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 32 42,4 x 42,4

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
48 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 25 42,4 x 33,7

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
48 +/-2

G(b)
48 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 20 42,4 x 26,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
48 +/-2

G(b)
48 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
32 x 15 42,4 x 21,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
48 +/-2

G(b)
48 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 40 48,3 x 48,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
57 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 32 48,3 x 42,4

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
57 +/-2

G(b)
57 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 25 48,3 x 33,7

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
57 +/-2

G(b)
57 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
40 x 20 48,3 x 26,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
57 +/-2

G(b)
57 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 50 60,3 x 60,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
64 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 40 60,3 x 48,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
64 +/-2

G(b)
60 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 32 60,3 x 42,4

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
64 +/-2

G(b)
57 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
50 x 25 60,3 x 33,7

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
64 +/-2

G(b)
51 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 65 76,1 x 76,1

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
76 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 50 76,1 x 60,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
76 +/-2

G(b)
70 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 40 76,1 x 48,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
76 +/-2

G(b)
67 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
65 x 32 76,1 x 42,4

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
76 +/-2

G(b)
64 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 80 88,9 x 88,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
86 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 65 88,9 x 76,1

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
86 +/-2

G(b)
83 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 50 88,9 x 60,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
86 +/-2

G(b)
76 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
80 x 40 88,9 x 48,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%, max +/- 0,5 mm
DIN 2615 | *:+/- 0,4 mm

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
86 +/-2

G(b)
73 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 100 114,3 x 114,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
105 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 80 114,3 x 88,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
105 +/-2

G(b)
98 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 65 114,3 x 76,1

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
105 +/-2

G(b)
95 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
100 x 50 114,3 x 60,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
105 +/-2

G(b)
89 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
125 x 125 139,7 x 139,7

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
124 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
125 x 80 139,7 x 88,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
124 +/-2

G(b)
111 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
125 x 65 139,7 x 76,1

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
124 +/-2

G(b)
108 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 150 168,3 x 168,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
143 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 125 168,3 x 139,7

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
143 +/-2

G(b)
137 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 100 168,3 x 114,3

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
143 +/-2

G(b)
130 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
150 x 80 168,3 x 88,9

Ø interno
D – 2 x w.t

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,5 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
143 +/-2

G(b)
124 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 200 219,1 x 219,1

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
178 +/-2

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 150 219,1 x 168,3

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
178 +/-2

G(b)
168 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 125 219,1 x 139,7

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
178 +/-2

G(b)
162 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
200 x 100 219,1 x 114,3

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
178 +/-2

G(b)
156 +/-2

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
250 x 250 273 x 273

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
216 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
250 x 200 273 x 219,1

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
216 +/-5 (+/-3)

G(b)
203 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
250 x 150 273 x 168,3

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
216 +/-5 (+/-3)

G(b)
194 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
250 x 125 273 x 139,7

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
216 +/-5 (+/-3)

G(b)
191 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 300 323,9 x 323,9

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
254 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 250 323,9 x 273

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
254 +/-5 (+/-3)

G(b)
241 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 200 323,9 x 219,1

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
254 +/-5 (+/-3)

G(b)
229 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
300 x 150 323,9 x 168,3

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
254 +/-5 (+/-3)

G(b)
219 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
350 x 350 355,6 x 355,6

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
279 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
350 x 300 355,6 x 323,9

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
279 +/-5 (+/-3)

G(b)
270 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
350 x 250 355,6 x 273

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
279 +/-5 (+/-3)

G(b)
257 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
350 x 200 355,6 x 219,1

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
279 +/-5 (+/-3)

G(b)
248 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 400 406,4 x 406,4

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
305 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 350 406,4 x 355,6

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
305 +/-5 (+/-3)

G(b)
305 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 300 406,4 x 323,9

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
305 +/-5 (+/-3)

G(b)
295 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
400 x 250 406,4 x 273

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
305 +/-5 (+/-3)

G(b)
283 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 450 457 x 457

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
343 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 400 457 x 406,4

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
343 +/-5 (+/-3)

G(b)
330 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 350 457 x 355,6

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
343 +/-5 (+/-3)

G(b)
330 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
450 x 300 457 x 323,9

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
343 +/-5 (+/-3)

G(b)
321 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 500 508 x 508

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
381 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 450 508 x 457

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
381 +/-5 (+/-3)

G(b)
368 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 400 508 x 406,4

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
381 +/-5 (+/-3)

G(b)
356 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
500 x 350 508 x 355,6

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
381 +/-5 (+/-3)

G(b)
356 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 600 610 x 610

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
432 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 500 610 x 508

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
432 +/-5 (+/-3)

G(b)
432 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 450 610 x 457

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
432 +/-5 (+/-3)

G(b)
419 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
600 x 400 610 x 406,4

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:-12,5% / +15%

F(a)
432 +/-5 (+/-3)

G(b)
406 +/-5 (+/-3)

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
700 x 700 711 x 711

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:T<=10 mm: -0,35 mm / +15%T>10 mm: -0,5 mm / +15%

F(a)
521 +/-5 (+/-3)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
800 x 800 813 x 813

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:T<=10 mm: -0,35 mm / +15%T>10 mm: -0,5 mm / +15%

F(a)
597 +/-10 (+/-5)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
900 x 900 914 x 914

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:T<=10 mm: -0,35 mm / +15%T>10 mm: -0,5 mm / +15%

F(a)
673 +/-10 (+/-5)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater
1000 x 1000 1016 x 1016

Ø interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2615:+/-1%
DIN 2615 | *:+/- 0,6 %

Tolleranza sullo spessore
T:T<=10 mm: -0,35 mm / +15%T>10 mm: -0,5 mm / +15%

F(a)
749 +/-10 (+/-5)

G(b)
–

Fuori squadra e allineamento
X(Q***):X = 1 % of the outside diameter at the point measured or 1 mm, whichever is the greater

Se non diversamente indicato, le misure sono in mm.
Le dimensioni tra parentesi si riferiscono solo alla DIN 2615.

Diametri:
Le tolleranze sul diametro esterno devono essere misurate alle estremità.
Al fine di garantire il regolare flusso del fluido attraverso il raccordo, il diametro interno, in qualsiasi sezione del tee, deve essere almeno il 70% del diametro interno alle estremità.
* Opzioni che devono essere specificate nell’ordine.

Ovalizzazione:
L’ovalizzazione (0) è calcolata in percentuale, con la seguente equazione:
0 = (Dmax-Dmin)/Dx100, dove:
Dmax = max. diametro esterno D, misurato nello stesso piano, in mm;
Dmin = min. diametro esterno D, misurato nello stesso piano, in mm;
D = diametro esterno specificato, in mm.
Per raccordi di diametro esterno D ≤ 406,4 mm, l’ovalizzazione è inclusa nei limiti del diametro.
Per raccordi di diametro esterno D> 406,4 mm e con D / T <= 100, l’ovalizzazione
non deve superare il 2%.
Per i raccordi con un rapporto D / T > 100, i valori di ovalizzazione devono essere concordati al momento della richiesta e dell’ordine.
Per la DIN 2615 vedi la nota a pag. 60 (DIN 2609).

Fuori squadra:
*** DIN 2615, previo accordo può essere ridotta a 0,5% con un massimo di 0,5 mm


Sfoglia Catalogo