logo
IT
IT ENG

Tubi

Raccordi

Prefabbricazioni

Dimensioni e tolleranze EN 10253-4 (DIN 2605)

Ø DN Ø D
15 21,3

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):25 (17,5) +/-2
C:50 +/-7
B (b):36 (28) +/-7
(e):7

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):28 +/-2
C:56 +/-7
B (b):38 +/-7
(e):12

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):45 (42,5) +/-2
(b):53
(e):18

(DIN 2605 type 10) Radius ~ 5 D
(r):-
(b):-
(e):-

(DIN 2605 type 20) Radius ~ 10 D
(r):-
(b):-
(e):-

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
20 26,9

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):25 +/-2
C:50 +/-7
B (b):39 +/-7
(e):10

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):29 +/-2
C:58 +/-7
B (b):43 +/-7
(e):12

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):57 (57,5) +/-2
(b):71
(e):24

(DIN 2605 type 10) Radius ~ 5 D
(r):-
(b):-
(e):-

(DIN 2605 type 20) Radius ~ 10 D
(r):-
(b):-
(e):-

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
25 33,7

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):28 (25) +/-2
C:56 +/-7
B (b):42 +/-7
(e):10

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):38 +/-2
C:76 +/-7
B (b):55 (56) +/-7
(e):16

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):72 (72,5) +/-2
(b):90
(e):30

(DIN 2605 type 10) Radius ~ 5 D
(r):-
(b):-
(e):-

(DIN 2605 type 20) Radius ~ 10 D
(r):-
(b):-
(e):-

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
32 42,4

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):32 +/-2
C:64 +/-7
B (b):53 +/-7
(e):13

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):48 +/-2
C:96 +/-7
B (b):69 +/-7
(e):20

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):93 (92,5) +/-2
(b):114
(e):38

(DIN 2605 type 10) Radius ~ 5 D
(r):-
(b):-
(e):-

(DIN 2605 type 20) Radius ~ 10 D
(r):-
(b):-
(e):-

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
40 48,3

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):38 +/-2
C:76 +/-7
B (b):62 +/-7
(e):16

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):57 +/-2
C:114 +/-7
B (b):81 (81) +/-7
(e):24

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):108 (107,5) +/-2
(b):132
(e):45

(DIN 2605 type 10) Radius ~ 5 D
(r):-
(b):-
(e):-

(DIN 2605 type 20) Radius ~ 10 D
(r):-
(b):-
(e):-

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
50 60,3

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):51 +/-2
C:102 +/-7
B (b):81 +/-7
(e):21

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):76 +/-2
C:152 +/-7
B (b):106 +/-7
(e):32

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):135 +/-2
(b):165
(e):56

(DIN 2605 type 10) Radius ~ 5 D
(r):254
(b):284
(e):105

(DIN 2605 type 20) Radius ~ 10 D
(r):508
(b):538
(e):210

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
65 76,1

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):63 +/-2
C:127 +/-7
B (b):102 +/-7
(e):26

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):95 +/-2
C:190 +/-7
B (b):133 +/-7
(e):39

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):175 +/-2
(b):213
(e):73

(DIN 2605 type 10) Radius ~ 5 D
(r):318
(b):356
(e):132

(DIN 2605 type 20) Radius ~ 10 D
(r):635
(b):673
(e):268

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
80 88,9

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%, max +/- 0,5 mm
DIN 2605 | *:+/- 0,4 mm

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):76 +/-2
C:152 +/-7
B (b):121 +/-7
(e):32

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):114 +/-2
C:228 +/-7
B (b):159 +/-7
(e):47

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):205 +/-2
(b):250
(e):85

(DIN 2605 type 10) Radius ~ 5 D
(r):381
(b):425
(e):158

(DIN 2605 type 20) Radius ~ 10 D
(r):762
(b):806
(e):316

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
100 114,3

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,5 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):102 +/-2
C:203 +/-7
B (b):159 +/-7
(e):42

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):152 +/-2
C:304 +/-7
B (b):209 (210) +/-7
(e):63

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):270 +/-2
(b):327
(e):112

(DIN 2605 type 10) Radius ~ 5 D
(r):508
(b):565
(e):210

(DIN 2605 type 20) Radius ~ 10 D
(r):1016
(b):1073
(e):421

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
125 139,7

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,5 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%
EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):127 +/-2
C:254 +/-7
B (b):197 +/-7
(e):53

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):190 +/-2
C:380 +/-7
B (b):260 +/-7
(e):79

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):330 +/-2
(b):400
(e):137

(DIN 2605 type 10) Radius ~ 5 D
(r):635
(b):705
(e):263

(DIN 2605 type 20) Radius ~ 10 D
(r):1270
(b):1340
(e):526

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
150 168,3

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,5 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):152 +/-2
C:305 +/-7
B (b):237 +/-7
(e):63

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):229 +/-2
C:458 +/-7
B (b):313 +/-7
(e):95

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):390 +/-2
(b):474
(e):162

(DIN 2605 type 10) Radius ~ 5 D
(r):762
(b):846
(e):316

(DIN 2605 type 20) Radius ~ 10 D
(r):1524
(b):1608
(e):631

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
200 219,1

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):203 +/-2
C:406 +/-7
B (b):313 +/-7
(e):84

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):305 +/-2
C:610 +/-7
B (b):414 +/-7
(e):126

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):510 +/-2
(b):620
(e):211

(DIN 2605 type 10) Radius ~ 5 D
(r):1016
(b):1126
(e):421

(DIN 2605 type 20) Radius ~ 10 D
(r):2032
(b):2142
(e):842

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
250 273,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):254 +/-5
C:508 +/-10
B (b):391 +/-7
(e):105

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):381 +/-5
C:762 +/-10
B (b):518 +/-10
(e):158

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):650 +/-5
(b):787
(e):269

(DIN 2605 type 10) Radius ~ 5 D
(r):1270
(b):1407
(e):526

(DIN 2605 type 20) Radius ~ 10 D
(r):2540
(b):2677
(e):1052

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
300 323,9

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):305 +/-5
C:610 +/-10
B (b):467 +/-7
(e):126

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):457 +/-5
C:914 +/-10
B (b):619 +/-10
(e):189

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):775 +/-5
(b):937
(e):321

(DIN 2605 type 10) Radius ~ 5 D
(r):1524
(b):1626
(e):631

(DIN 2605 type 20) Radius ~ 10 D
(r):3048
(b):3210
(e):1261

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
350 355,6

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):356 +/-5
C:711 +/-10
B (b):533 +/-7
(e):148

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):533 +/-5
C:1066 +/-10
B (b):711 +/-10
(e):221

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):850 +/-5
(b):1028
(e):352

(DIN 2605 type 10) Radius ~ 5 D
(r):1778
(b):1956
(e):737

(DIN 2605 type 20) Radius ~ 10 D
(r):3556
(b):3734
(e):1473

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
400 406,4

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):406 +/-5
C:813 +/-10
B (b):610 +/-7
(e):168

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):610 +/-5
C:1220 +/-10
B (b):813 +/-10
(e):253

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):970 +/-5
(b):1173
(e):402

(DIN 2605 type 10) Radius ~ 5 D
(r):2032
(b):2235
(e):842

(DIN 2605 type 20) Radius ~ 10 D
(r):4064
(b):4267
(e):1683

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
450 457,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):457 +/-5
C:914 +/-10
B (b):686 +/-10
(e):189

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):686 +/-5
C:1372 +/-10
B (b):914 +/-10
(e):284

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):1122 +/-5
(b):1350
(e):465

(DIN 2605 type 10) Radius ~ 5 D
(r):2286
(b):2515
(e):947

(DIN 2605 type 20) Radius ~ 10 D
(r):4572
(b):4801
(e):1894

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
500 508,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):508 +/-5
C:1016 +/-10
B (b):762 +/-10
(e):210

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):762 +/-5
C:1524 +/-10
B (b):1016 +/-10
(e):316

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):1245 +/-5
(b):1500
(e):516

(DIN 2605 type 10) Radius ~ 5 D
(r):2540
(b):2794
(e):1052

(DIN 2605 type 20) Radius ~ 10 D
(r):5080
(b):5334
(e):2104

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
600 610,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:-12,5% / +15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):610 +/-5
C:1220 +/-10
B (b):914 +/-10
(e):253

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):914 +/-5
C:1828 +/-10
B (b):1219 +/-10
(e):379

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):1524 (1525) +/-5
(b):1830
(e):632

(DIN 2605 type 10) Radius ~ 5 D
(r):3050
(b):3355
(e):1263

(DIN 2605 type 20) Radius ~ 10 D
(r):6100
(b):6405
(e):2527

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
700 711,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:T<=10mm: -0,35mm / +15%T>10mm: -0,5mm /+15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):711 +/-5
C:1422 +/-10
B (b):1066 +/-10
(e):295

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):1067 +/-5
C:2134 +/-10
B (b):1422 (1626) +/-10
(e):442

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):1778 +/-5
(b):2133
(e):737

(DIN 2605 type 10) Radius ~ 5 D
(r):3555
(b):3911
(e):1473

(DIN 2605 type 20) Radius ~ 10 D
(r):7110
(b):7466
(e):2945

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
800 813,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:T<=10mm: -0,35mm / +15%T>10mm: -0,5mm /+15%
DIN 2605-1 | T:-12,5% / +15%
EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):813 +/-10
C:1626 +/-10
B (b):1220 +/-10
(e):337

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):1219 +/-10
C:2438 +/-10
B (b):1625 +/-10
(e):505

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):2033 +/-10
(b):2439
(e):842

(DIN 2605 type 10) Radius ~ 5 D
(r):4065
(b):4472
(e):1684

(DIN 2605 type 20) Radius ~ 10 D
(r):8130
(b):8537
(e):3368

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
900 914,0

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:T<=10mm: -0,35mm / +15%T>10mm: -0,5mm /+15%
DIN 2605-1 | T:-12,5% / +15%

EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):914 +/-10
C:1828 +/-10
B (b):1371 +/-10
(e):379

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):1372 +/-10
C:2744 +/-10
B (b):1829 +/-10
(e):568

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):2285 +/-10
(b):2742
(e):947

(DIN 2605 type 10) Radius ~ 5 D
(r):4570
(b):5027
(e):1893

(DIN 2605 type 20) Radius ~ 10 D
(r):9140
(b):9597
(e):3768

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater
1000 1000

Diametro Interno
D – 2 x w.t.

Tolleranza sul Diametro D/DI
EN 10253-4 | D2:+/-1% or 0,5 mm whichever is the greater
EN 10253-4 | D3*:+/-0,75% or 0,3 mm whichever is the greater
EN 10253-4 | D4*:+/-0,5% or 0,1 mm whichever is the greater
DIN 2605:+/-1%
DIN 2605 | *:+/- 0,6 %

Tolleranza sullo spessore
EN 10253-4, DIN 2605-2 | T:T<=10mm: -0,35mm / +15%T>10mm: -0,5mm /+15%
DIN 2605-1 | T:-12,5% / +15%
EN 10253-4 model 2D (DIN 2605 type 2) Radius ~ 1 D
F (r):1016 +/-10
C:2032 +/-10
B (b):1524 +/-10
(e):421

EN 10253-4 model 3D (DIN 2605 type 3) Radius ~ 1.5 D
F (r):1524 +/-10
C:3048 +/-10
B (b):2032 +/-10
(e):631

EN 10253-4 model 5D (DIN 2605 type 5) Radius ~ 2.5 D
F (r):2540 +/-10
(b):3048
(e):1052

(DIN 2605 type 10) Radius ~ 5 D
(r):5080
(b):5588
(e):2104

(DIN 2605 type 20) Radius ~ 10 D
(r):10160
(b):10668
(e):4208

Fuori squadra – X(Q***)
1% O.D. or 1mm whichever is the greater

Se non diversamente indicato, le misure sono in mm.
Le dimensioni tra parentesi si riferiscono solo alla DIN 2605.

Diametri:
Le tolleranze sul diametro esterno devono essere misurate alle estremità.
Al fine di garantire il regolare flusso del fluido attraverso il raccordo, il diametro interno, in qualsiasi sezione del raccordo, deve essere almeno l’80% del diametro interno alle estremità.
* Opzioni che devono essere specificate nell’ordine.

Ovalizzazione:
EN 10253-4
L’ovalizzazione (0) è calcolata con la seguente equazione:
0 = (Dmax-Dmin)/D x 100
dove
0 = ovalizzazione, in percentuale;
Dmax = max. diametro esterno D, misurato nello stesso piano, in mm;
Dmin = min. diametro esterno D, misurato nello stesso piano, in mm;
D = diametro esterno specificato, in mm.
Per raccordi di diametro esterno D ≤ 406,4 mm, l’ovalizzazione è inclusa nei limiti del diametro.
Per raccordi di diametro esterno D> 406,4 mm e con D / T inferiore o uguale a 100, l’ovalizzazione non deve superare il 2%.
Per i raccordi con un rapporto D / T > 100, i valori di ovalizzazione devono essere concordati al momento della richiesta e dell’ordine.
L’ovalizzazione sul corpo delle curve non deve superare il 4%.

DIN 2605 (DIN 2609)
L’ovalizzazione R, in percentuale, è calcolata con la seguente formula:
R = 200 x (Dmax-Dmin) / (Dmax+Dmin)
dove D max è il più grande diametro esterno e D min è il diametro esterno più piccolo, misurati in un piano.
Per i raccordi di diametro esterno D ≤ 200 mm, l’ovalizzazione è inclusa nei limiti del diametro.
Per i raccordi di diametro esterno D> 200 mm, l’ovalizzazione non deve superare il 2%.
L’ovalizzazione sul corpo delle curve non deve superare il 4%.

Fuori squadra:
*** DIN 2605, previo accordo può essere ridotta a 0,5% con un massimo di 0,5 mm.


Sfoglia Catalogo